Connections, Important information – Marantz AV8801 User Manual

Page 9

Advertising

Important information

Make connections before using this unit.
To create a home theater that can play back higher quality video and audio by fully utilizing the
capabilities of this unit and your video devices, connect this unit to each of your video devices with
HDMI cables.

n HDMI-compatible device

If your video device does not support HDMI connections, use the following connection.

n HDMI-incompatible device

This unit can change the source that is assigned to the DIGITAL AUDIO IN, ANALOG AUDIO IN,
COMPONENT VIDEO IN and VIDEO IN connectors.
For details on assigning a source to connectors, see “Changing the source assigned to connectors”
(

vpage 16

). For the setting method, see “Input Assign” (

vpage 133

NOTE

• While signals are being upscaled to 4K, the menu screen is only displayed on a TV that is connected

to this unit via HDMI.

• Do not plug in the power cord until all connections have been completed. However, when the

“Setup Assistant” is running, follow the instructions in the “Setup Assistant” (

C page 7) screen

for making connections. (During “Setup Assistant” operation, the input/output connectors do not
conduct current.)

• When running the “Setup Assistant” (

C page 7), turn off the power supply of connected devices.

• When making connections, also refer to the operating instructions of the other devices being connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.

Connections

n HDMI-compatible device

vpage 10

vpage 12