Subwoofer level, To enjoy your favorite sound mode, Dialog enhancer – Marantz AV8801 User Manual
Page 123: Surround parameter
120
Surround Parameter
Default settings are underlined.
You can adjust the surround audio sound field effects to match your preferences.
The items (parameters) that can be adjusted depend on the signal being input and the currently set
sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters”
(
NOTE
• Some setting items cannot be set while playback is stopped. Make the settings during playback.
• When the sound mode is “PURE DIRECT”, you cannot set the surround parameters.
Setting items
Setting details
Home Theater EQ
Softens the treble range
of movie soundtracks for
better understanding.
On : “Home Theater EQ” is used.
Off : “Home Theater EQ” is not used.
Loudness Management
This can be set in the
Dolby TrueHD mode.
This sets whether to
output as specified in
“Dynamic Compression”
or output directly without
compressing the dynamic
range of audio recorded in
the disc.
On : Outputs using the settings made in “Dynamic Compression” and
“Dialogue normalization” (
Off : “Dynamic Compression” settings and “Dialogue normalization” are
disabled, and the signals on the disk are output as is.
Dynamic Compression
Compress dynamic range
(difference between loud
and soft sounds).
Auto : Automatic dynamic range compression on/off control according to
source.
Low / Medium / High : These set the compression level.
Off : Dynamic range compression always off.
You can set “Auto” only for the Dolby TrueHD source.
Bass Sync
For contents recorded in
multi-channel such as Blu-
ray discs, the recorded low
frequency effects (LFE) may
be out of synch and delayed.
This function corrects such
a delay of low frequency
effects (LFE).
0ms – 16ms
How low frequency effects (LFE) are delayed differ according to the
disc. Set this to the desired value.
Dialog Enhancer
Default settings are underlined.
Adjusts and enhances the frequency band corresponding to the human voice at the center channel to
make the voice clearer.
Setting items
Setting details
Enhancer
Low / Medium / High : Enhances the human voice.
Off : Does not enhance the human voice.
Subwoofer Level
Default settings are underlined.
This setting adjusts the volume level for the subwoofer.
Setting items
Setting details
Subwoofer 1 Level
This setting adjusts the
volume level for the
subwoofer 1.
–12dB – +12dB (0dB)
Subwoofer 2 Level
This setting adjusts the
volume level for the
subwoofer 2.
–12dB – +12dB (0dB)
Subwoofer
Turn subwoofer output on
and off.
On : The subwoofer is used.
Off : The subwoofer is not used.
NOTE
This can be set when the sound mode is “DIRECT” and “PURE
DIRECT” (
) is
“LFE+Main”.
Audio
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
v See overleaf
DVD