Marantz AV8801 - Manual (Page 139)

136
Inputs
Input Select
Default settings are underlined.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”. Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
7.1CH IN : Only signals input from the 7.1CH IN connector will be played
back.
• “Digital” can be set for input sources for which “DIGITAL” is assigned
at “Input Assign” ( vpage 134 ).
• “AUX2” or “TV AUDIO” can be selected only when “Analog” is assigned
to the input source.
• When digital signals are properly input, the indicator lights on
the display. If the indicator does not light, check “Input Assign”
( vpage 134 ) and the connections.
• If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is “TV AUDIO” is fixed to ARC.
• The surround mode cannot be set if the input mode is set to “7.1CH IN”.
Decode Mode
Set the audio decode mode
for input source.
CBL/SAT DVD
Blu-ray GAME
AUX1 AUX2
MEDIA PLAYER CD
TV AUDIO
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
• This item can be set for input sources for which “DIGITAL” is assigned
at “Input Assign” ( vpage 134 ).
• Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
Video Source
Default settings are underlined.
Video of another input source is played back combined with the playing audio.
Setting items Setting details
Video Select Default : Play the picture and sound of the input source.
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CD /
TV AUDIO : Select video input source to view. The video of the selected
input source is played along with the audio currently being played. This can
be set for individual input sources.
“CBL/SAT”, “DVD”, “Blu-ray”, “GAME”, “AUX1”, “AUX2”, “MEDIA
PLAYER”, “CD” or “TV AUDIO” can be selected only when “COMP”
or “VIDEO” is assigned to the input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which “Hide” is selected at “Hide Sources”
( vpage 135 ) cannot be selected.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD