Marantz AV8801 - Manual (Page 133)

130
Video
Setting items Setting details
Resolution
Set the output resolution.
You can set “Resolution”
separately for HDMI output
of the analog video input
and HDMI input.
CBL/SAT z DVD z
Blu-ray z GAME z
AUX1 z AUX2 z
MEDIA PLAYER z
iPod/USB CD z
NETWORK TV AUDIO z
Auto : The number of pixels the TV connected to the HDMI MONITOR
OUT connector supports is detected automatically and the appropriate
output resolution is set.
480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K : Set the output
resolution.
• This item can be set when “i/p Scaler” is set to anything other than
“Off”.
• When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the
analog video input signal and HDMI input signal can be set.
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
signals.
• When set to “1080p:24Hz”, you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to “1080p”.
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Progressive Mode
Set an appropriate
progressive conversion
mode for the source video
signal.
CBL/SAT z DVD z
Blu-ray z GAME z
AUX1 z AUX2 z
MEDIA PLAYER z
CD z
TV AUDIO z
Auto : The video signal is automatically detected and the appropriate
mode is set.
Video : Select mode suitable for video playback.
Video and Film : Select mode suitable for video and 30-frame film
material playback.
This item can be set when “i/p Scaler” is set to anything other than
“Off”.
Setting items Setting details
Aspect Ratio
Set the aspect ratio for the
video signals output to the
HDMI.
CBL/SAT z DVD z
Blu-ray z GAME z
AUX1 z AUX2 z
MEDIA PLAYER z
iPod/USB CD z
NETWORK TV AUDIO z
16:9 : Output at 16:9 aspect ratio.
4:3 : Output at 4:3 aspect ratio with black bars on the sides of a 16:9 TV
screen (except for 480p/576p output).
“Aspect Ratio” can be set when “i/p Scaler” is set to anything other
than “Off”.
z “CBL/SAT”, “DVD”, “Blu-ray”, “GAME”, “AUX1”, “AUX2”, “MEDIA PLAYER”, “CD” or “TV AUDIO”
can be set when “HDMI”, “COMP” or “VIDEO” ( vpage 133 , 134 ) has been assigned.
Analog Video Out
Default settings are underlined.
Assigns the zone that uses the COMPONENT VIDEO MONITOR OUT and VIDEO MONITOR OUT
connectors.
Setting items Setting details
ZONE MAIN ZONE : Uses the COMPONENT VIDEO MONITOR OUT and the
VIDEO MONITOR OUT connectors for MAIN ZONE.
ZONE3 : Uses the COMPONENT VIDEO MONITOR OUT and the VIDEO
MONITOR OUT connectors for ZONE3.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD