Visara LINCS Configuration - Manual (Page 122)

104
LINCS Configuration
707023-003
Gateway Circuit 023 (ESCON CNC to IP/Bridge)
Gateway Circuit 023 LINCS C8.2 Central Control
UPSTREAM CONNECTION - USC
Line: ESC1
Link Profile: 02 (ESCON/CNC)
CU Index: 01
Subchannel Address: 00
DOWNSTREAM CONNECTION - DSC
Line: FET2
Link Profile: 03 (IP/Bridge)
ARP Filter (IP Address): ___ ___ ___ ___
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
The Default Gateway Circuit
Default Gateway Circuit LINCS C8.2 Central Control
UPSTREAM CONNECTION
Line: FET1
Link Profile: 08 (TCP/IP)
(additional fields based on Link Profile type)
DOWNSTREAM CONNECTION
Line: TRC1
Link Profile: 07 (LLC)
(additional fields based on Link Profile type)
PF: 1-Menu 3-Return 4-Cpy-GW 5-Cpy_Fld 7-Back 8-Forw 9-Default 10-Done
Function Keys
If PF3-Def_Dflt is selected while defining gateway circuits, a panel similar to this is displayed.
This panel allows you to define a Default Gateway Circuit. When a gateway circuit is added
or defaulted, it will assume the values defined in the default circuit. The panel looks the same
as the gateway circuit panels described in the previous sections, except for the PF key directives:
• PF3-Return - Returns to the display to the previously displayed gateway circuits panel
• PF4-Cpy_GW - Copies the Default Gateway Circuit’s values to all the defined gateway
circuits.
• PF5-Cpy_Fld - Copies the field the cursor is on to all other gateway circuits. This option
is not available for Central Site Change Facility.
• PF9-Default - Default to LINCS assigned values.