Visara LINCS Configuration - Manual (Page 196)

178
LINCS Configuration
707023-003
3290 Update Panel
The choices in this field are:
• Process host data BEFORE displaying panel Use this option to maximize performance.
During high data rate transmissions, however, host messages could be overwritten.
• Display panel BEFORE allowing new host data Use this option in environments where
3290s are system consoles and/or all host messages must be seen.
3290 DFT Password
Enter the 6-digit hex password to be used by the DFT devices. For information on 3290 setup
conditions requiring the use of the password, refer to the IBM document 3290 Information
Panel: Description and Reference, GA23-0021.
Extended Vital Product Data
Extended Vital Product Data LINCS C8.2 Central Control
Extended VPD labels: 1. ________________
2. ________________
3. ________________
4. ________________
5. ________________
6. ________________
7. ________________
8. ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
The Extended Vital Product Data panel will be displayed anytime coax or LANSYS devices are
configured. Extended Vital Product Data (Extended VPD) is information consisting of label and
data fields. This information can be about any subject, such as building location and department
number. The label fields are entered and saved during configuration. The data fields are entered
by the user and are saved in that display along with the corresponding labels.
Coax Multiplexing
Coax Multiplexing LINCS C8.2 Central Control
Method of Connection on MCC1: 32 Port Coax Multiplexor
MCC2: 32 Port Coax Multiplexor
MCC3: Standard
MCC4: Standard
Dynamic Multiplexing: Disable
Coax Poll Rate: Enhanced
Automatic Coax Recovery: Disable
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
This panel will be displayed if any MCCs are configured on the Product Description panel.