Visara LINCS Configuration - Manual (Page 64)

46
LINCS Configuration
707023-003
Link Subsystem Name on Frame Relay LLC Options
The field allows you to assign a name to identify the subsystem in alerts that are sent to the
host (for example, SNA alerts). You can use the default value VISARALAN or assign a 6-
digit alphanumeric non-blank name.
LU to PU Mapped Circuits
LU to PU Mapping is not supported over Frame Relay, so this field must be set to 0 for HSC
LLC links. The field is still shown, because the LLC Options panel is shared with other line
types by the configuration software.
TCP/IP Options (HSC)
This panel will appear if TCP/IP is enabled on the HSC Line panel.
Line Options/HSC1.0 LINCS C8.2 Central Control
TCP/IP OPTIONS
IP Address: ___ ___ ___ ___
Subnet Mask: ___ ___ ___ ___
TELNET Host Connections: 20
TN3270 Client Connections: 40
IP Router: Enable
BSD 4.2 IP Broadcast: Disable
Expanded IP Addressing: Disable
TCP Quiet Time (sec): 0000
Default Router Address: ___ ___ ___ ___
DNS Primary Name Server: ___ ___ ___ ___
DNS Secondary Name Server: ___ ___ ___ ___
DNS/Ping Response Time: 0000
DNS Default Domain:
___________________________________________________________________
SNMP Trap IP Address: ___ ___ ___ ___
SNMP Read Authentication String: ________________
SNMP Write Authentication String: ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
Frame Relay PVCs
Frame Relay PVCs LINCS L I N C S C 8 . 2 C e n t r a l
Control
DLCI Line CIR (bps) DLCI Line CIR (bps)
123 HSC2.0 0064000 663 HSC2.0 0064000
124 HSC2.0 0064000 664 HSC2.0 0032000
050 HSC2.0 0512000 ___ HSC2.0 0064000
___ HSC2.0 0002400 665 HSC2.0 0128000
___ HSC2.0 0064000 ___ HSC2.0 0064000
.
.
___
HSC2.0 0064000 ___ HSC2.0 0064000
PF: 1-Menu 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done