Visara LINCS Configuration - Manual (Page 219)

201
Chapter 13. Device Options
707023-003
Extended (over 512) 3270 LUs Feature
LINCS requires 1K of Feature Memory for each LU after the first 512 LUs.
SCC Support
This field applies to all hardware models except the 1174-15X. 128K of feature memory is
required for each SCC configured on these Hardware Platforms (SCCs are configured on the
Product Description panel).
AIC
256K of feature memory is required if any ASCII ports are defined on the 1174-65X or
SCON-22L models.
5550 Printer Sharing
This is a protected field. If the 5550 Printer Sharing RPQ is enabled, 128K of feature memory
is required.
LPD Printer
This field displays the amount of feature LINCS will allocate for all LPD printers. You allocated
Feature Memory for each LPD printer, when you defined them on the Network Device
Definition panels. LPD printers require feature memory to buffer prints that LINCS receives
as it sends the data to the LPD print server.
See Overview of LAN Printers for more information on LPD Printers.
LPD Print Servers
This is the amount of Feature memory allocated for buffering LPD print data destined to
LINCS printers with Print Server classes assigned. All configured LPD queues share this
pool. Toggle to select the amount of memory you wish to allocate for LPD Print Server
memory pool.
Presentation Space Storage memory is also required to maintain the session and relevant print
information. For each print LPD request, 1K of memory will be reserved from Presentation
Space Storage until the print has been completed or aborted. If not enough memory is available
in either memory location, then the print request will be negatively acknowledged and the
TCP connection will be terminated. See Presentation Space Storage to calculate memory
requirements for session and print information.
A 285__01 event will be logged if Presentation buffers were unavailable.
A 285__05 event will be logged if LPD Print Server memory was unavailable.
See Overview of LAN Printers for more information on LPD Print Servers.
Presentation Space Storage
This is a protected field which displays the memory available for Presentation Space Storage.
The memory is used to maintain screen images for the following features. See Calculating