Visara LINCS Configuration - Manual (Page 235)

217 707023-003
15. Configuration Complete
While in the Configuration Utility, pressing PF10-Save on an any panel, takes you to the
Configuration Complete panel and causes all Configuration data to be examined for
inconsistencies. If any inconsistencies are present, a message will be displayed to direct you
to the panel containing the error. Upon paging to the panel in error, the specific warning
message will be displayed. Note that the error message on the panel in question will usually
not be displayed until you attempt to leave that panel. Configuration data may NOT be saved
as long as any configuration inconsistencies exist.
When configuring with the Central Site Facility, PF3-Return will be displayed instead of
PF10-Save. PF3-Return returns you to the Central Site Library panel, so you can save or do
whatever you like with the Working Copy just modified.
Once the Configuration Data has been validated and saved, the Apply Configuration Changes
panel will be displayed.
Configuration Complete Panel
Configuration Complete LINCS C8.2 Central Control
Feature Activation is Required for: (*=not active on this 1174)
IPX SNA/TN3270 Clients Incoming/Outgoing TELNET
003 Extended ESCON CUs
HPP’s Required: 1
If an extra HPP is available, it will be used for the Network Devices.
PF: 1-Menu 7-Back 9-Default 10-Save
The Configuration Complete panel displays Feature Activation and HPP requirements based
upon the values in the Configuration Data.
Once the Configuration Data has been validated and saved (pressing <PF10>), the Apply
Configuration Changes panel will be displayed.
System Disk Drive
This is a toggle field which indicates which disk to write the Configuration data to. The initial
value will be the drive which the data was read from. The field may be toggled to any drive
which contains a System disk.
HPP Requirements
Whenever a non-zero value appears for the HPP requirement, this is an indication that additional
processing power is required to support the configuration beyond the base processor. (This
does not necessarily indicate whether that card is currently present or not, only that the card
needs to be present when booting this configuration.) This processing power can be supplied
by having the requested number of HPP cards installed on the platform at the time the saved
configuration is booted. The HPP card has subsequently been replaced by a newer more