Appn len lus – Visara LINCS Configuration User Manual

Page 155

Advertising
background image

137

Chapter 7. SNA Options

707023-003

APPN LEN LUs

An APPN LEN LUs panel is displayed for each Adjacent LEN node which has been defined
on an APPN Predefined Circuits panel. Here you can predefine LUs residing in these LEN
nodes, since these LUs cannot be located dynamically. One LEN node can be designated as
the Wildcard Node, if desired.

Note that if no LEN nodes have been defined, this panel will not be displayed.

APPN LEN LUs

APPN LEN LUs

LINCS C8.2 Central Control

LEN node CP Name:

THISNTWK.LEN1

Wildcard Support:

Disable

LU Names:

LEN1LU1_ LEN1LU2_ LEN1LU3_ LEN1LU4_

LEN1LU5_ LEN1LU6_ LEN1LU7_

LEN1LU8_

CICS*___

________

________

________ ________ ________

________

________

________

________

________

________ ________ ________

________

________

________

________

________

________ ________ ________

________

________

.
.
.
________

________

________

________ ________ ________

________

________

________

________

________

________ ________ ________

________

________

PF: 1-Menu

4-Add

5-Delete

7-Back

8-Forw

9-Default

10-Done

LEN Node CP Name

This protected field displays the CP Name of the Adjacent LEN node that LUs defined on the
current panel will be assigned to.

Wildcard Support

This field enables a particular LEN node to act as a Wildcard node. When this Network Node
cannot locate a resource in the network, the locate request is routed to the LEN node providing
Wildcard support. Wildcard Support should only be enabled for one LEN node in the Network,
and is typically assigned to VTAM.

LU Names

These fields define LUs on the CP specified in the CP Name field. Press PF4-Add_LUs to
define up to 120 LUs on a given CP. Up to 480 LEN LUs may be predefined in all.

LU Names can be up to eight alphanumeric characters, with no embedded spaces, and the
first character must be alphabetic. You may define generic LU names, for example CICS*
(from the example panel), which would match all LU names beginning with “CICS”.

Pressing PF5-Del_LUs will delete all the LUs defined on the current panel.

Advertising