Visara LINCS Configuration - Manual (Page 237)

219
Chapter 15. Configuration Complete
707023-003
Supervisor Password
This field specifies when the new supervisor password will take.
Options are After IML (default) and Immediate.
Resource Authorization Matrix on Apply Configuration
Changes
If Immediate is chosen, the Resource Authorization Matrix from each Device Profile in the
“working copy” will be copied to the corresponding Device Profile in the current configuration.
Any resources which devices are currently using will not be taken away. The change will take
effect the next time a device attempts to access a resource.
For example, assume a device is currently connected to 3270 Host Class 01 and the
authorization to this class is taken away by applying a new Resource Authorization Matrix.
The device will NOT be disconnected from his LU immediately, but subsequent attempts to
connect to this class will fail.
Options are After IML (default) and Immediate.
Printer Assignments on Apply Configuration Changes
If Immediate is chosen, the printer assignments will be applied to all devices. This functions
the same as if each device had performed a Printer Ident function to select the printer
assignments, except that devices will ALWAYS be allowed to ident to their default printers,
whether or not access is allowed in the Resource Authorization Matrix. In other words, the
configured Printer Assignment is always authorized. Note that if you assign a new printer to
a port, previously defined as a display port, and authorize other display ports to print to the
new printer, the printer assignments can not take effect immediately, since you can not define
a new printer port to take effect immediately.
Options are After IML (default) and Immediate.
Static IP Routing
If immediate is chosen, the new static routing changes will go into effect immediately, allowing
new routing paths to be used, and eliminating routing entries that have been deleted. If After
IML is selected, then the routing changes will take effect only after an IML.
Options are After IML (default) and Immediate.
TN3270 Client Definitions
Existing TN3270 Client Definitions configured on the TN3270 Client Definition panels can be
changed in a limited fashion, and made to take affect immediately if desired. Two things that
will not take affect immediately, additional entries added to the configuration, and assigning a
new TCP port for LINCS to listen on (listening ports are assigned at boot time). Changes such
as assigning a user to a different LINCS resource or adding/changing an IP address limitation
are accepted. Note that this option does not affect TN3270 or Telnet entries within the
nickname.sys definitions whatsoever. Nickname.sys files can be refreshed with utility 3/5.
Options are After IML (default) and Immediate.