Visara LINCS Configuration - Manual (Page 84)

66
LINCS Configuration
707023-003
TCP/IP Options (TRC)
This panel will appear if TCP/IP is enabled on the TRC Line panel.
Line Options/TRC1 LINCS C8.2 Central Control
TCP/IP OPTIONS
IP Address: ___ ___ ___ ___
Subnet Mask: ___ ___ ___ ___
TELNET Host Connections: 20
TN3270 Client Connections: 40
IP Router: Enable
BSD 4.2 IP Broadcast: Disable
Expanded IP Addressing: Disable
TCP Quiet Time (sec): 0000
Default Router Address: ___ ___ ___ ___
DNS Primary Name Server: ___ ___ ___ ___
DNS Secondary Name Server: ___ ___ ___ ___
DNS/Ping Response Time: 0000
DNS Default Domain:
___________________________________________________________________
SNMP Trap IP Address: ___ ___ ___ ___
SNMP Read Authentication String: ________________
SNMP Write Authentication String: ________________
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
IPX Options (TRC)
This panel will appear if IPX is enabled on the TRC line panel.
Line Options/TRC1 LINCS C8.2 Central Control
IPX OPTIONS
Frame Network
Format Options Number RIP and SAP Options RIP SAP
802.2 Enable 53620001 Broadcast Timer (30 sec): 0002 0002
Aging Timer (30 sec): 0006 0006
Broadcast RIP/SAP Entries: 0050 0007
SNAP Disable _________ Broadcast Timer (30 sec): 0002 0002
Aging Timer (30 sec): 0006 0006
Broadcast RIP/SAP Entries: 0050 0007
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
Response Timer-LLC Options
This field indicates the minimum amount of time in seconds the LAN adapter will wait for an
acknowledgment after transmitting a LLC frame before polling the remote station. This field
toggles the following time selections:
1.00, 1.68, 2.00, 3.00, 4.00, 5.00, 6.96, 10.44, 13.92, 17.40
Select a time greater than the expected delay of the network in order to avoid unnecessary
polls. The default is 1.68 seconds.