Visara LINCS Configuration - Manual (Page 82)

64
LINCS Configuration
707023-003
Line Options/TRC
Line Options/TRC1 LINCS C8.2 Central Control
LAN Address: 4000 1174 0000
Token Ring Speed: 16 Mbps without Early Token Release
Source Routing: Enable With All Routes Broadcast
802.2 LLC: Enable
TCP/IP: Disable
IPX: Disable
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
When paging forward, additional TRC line options panels may be displayed based on the
selections made on this panel. They are:
• LLC Options
• TCP/IP Options
• IPX Options
Source Routing
This toggle field is used to enable communications through source routing bridges for all
Token Ring protocols. Options are:
• Enable With All Routes Broadcast
• Enable With Single Route Broadcast
• Disable
802.2 LLC (TRC)
Options are: DISABLE or ENABLE
This toggle field must be enabled to configure any connections or circuits with LLC link
levels, for example, LANSYS connections, LU to PU mapped circuits, LLC gateway circuits
and LLC hosts circuits.
Note: This option should not be used to enable 802.2 frame types on IPX. Use the IPX
Options panel for that, which is displayed if IPX is enabled on this line.
TCP/IP
Options are: DISABLE or ENABLE
This toggle field must be enabled to configure any connections or circuits with TCP/IP link
levels, such as TELNET connections, IP gateway circuits, or IP host circuits.
IPX
Options are: DISABLE or ENABLE
This toggle field is used to enable IPX protocol support. For example, IPX must be enabled to
support IPX SNA Server or IPX Router through this board.