Visara LINCS Configuration - Manual (Page 144)

126
LINCS Configuration
707023-003
LU Ranges
You may specify either a single LU, by entering an address in only the LO column, or a range.
Obtain the LU values from your systems programmer.
The range for:
• SNA is 02 to FE (hex)
• BSC is 00 to 1F (hex)
• Non-SNA is 00 to 7F (hex)
• Non-SNA ESCON is 00 to 1F (hex)
Note that whether LU numbers are entered in hex or decimal is set in the General Options panel.
Class Name
This field allows one to define a 16 character name to the class. This name may be used to
connect to the class on the 3270 Connect Screen, and will appear as a toggle option for the
Host Assignments at Power On field on the Device Profile/Host Assignments panel.
Note that Class Names are always saved as uppercase. Workstations and PCs that will refer to
the Class Name must match exactly.
LU to PU Mapping Profiles
LU to PU Mapping Profile 000 LINCS C8.2 Central Control
UPSTREAM HOST CONNECTION
3270 Class:MOD2 Number of LUs: ___
3270 Host: IBM_RING Lower LU (hex): 002 Upper LU (hex): 027
3270 Host: CHANNEL_SNA Lower LU (hex): 010 Upper LU (hex): 014
3270 Host: CHANNEL_NON_SNA Lower LU (hex): 010 Upper LU (hex): 00F
3270 Host: IBM_SDLC Lower LU (hex): 016 Upper LU (hex): 018
Disable ___ ___
Disable ___ ___
Disable ___ ___
DOWNSTREAM CONNECTION
Link Profile: 08 - LLC
PUID: _____
Remote LAN Address: 0200 2222 0000
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
This panel will be displayed if LU to PU Mapping Circuits are configured on the LLC Options
page of a Line Options panel and an LLC link profile has been defined.
When entering the LPM Utility from the Configuration Main Menu, a LPM profile number
may be entered as a parameter. Entering a specific profile number as a parameter will advance
the display directly to that profile.
PF3_Def_Dflt brings up the Default LU to PU Mapping Profile, where you can define default
values for new LU to PU Mapping profiles.