Visara LINCS Configuration - Manual (Page 212)

194
LINCS Configuration
707023-003
Device Profile Assignments panel
Device Profile Assignments LINCS C8.2 Central Control
Dev ------- Host Assignment At Power On (Decimal LUs) -------
Port Prof A B C D E F G H I J
———————————————————————————————————————————————————————————————————————————
——
--- -- ------ ------ ------ ------ ------ ------ ------ ------ ------ ------
000 00 *_ =__ 00 001 01 000 01 002 02 000 02 001 03 000 03 00C 0F 000 0F 001
001 00 00 002 01 003 02 002 09 00F *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
002 00 *_ =__ 00 003 00 004 00 00A 00 00B __ ___ __ ___ __ ___ __ ___ __ ___
003 00 00 008 *_ =__ *_ =__ 0A 002 *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
004 01 00 00F __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___
005 01 01 00F __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___
006 01 02 00E __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___ __ ___
007 02 02 006 01 001 *_ =__ *_ =__ *_ =__ __ ___ __ ___ __ ___ __ ___ __ ___
008 00 04 001 03 001 07 002 05 001 *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
009 00 04 002 03 002 07 003 05 002 *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
010 00 *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
011 00 *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
012 00 *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
013 00 0E 00D *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
014 00 0E 00E *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
015 00 0E 00F *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__ *_ =__
(00 - 7F)3270 Host (=)3270 Class (>)TELNET (%)Print Q (+)LAT (&)ASCII
PF: 1-Menu 3-Asn_Dflt_LUs 7-Back 8-Forw 9-Default 10-Done
This panel will be displayed if there are any defined devices. Here you can assign device
profiles and hosts to each port. The session will be connected to the indicated host resource
when the device powers on. If the connection attempt fails, the session will power on with the
Connect Panel.
The first field is an abbreviated version of the Default Host Assignment field on the Device
Profile/Host Assignments panel, the second field’s meaning varies. A blank field indicates a
disabled session.
Port
A protected field which displays the 3 digit port number for the MCC (or FET or TRC or
ETH, as identified in the panel title).
Device Profile
A data entry field used to assign a Device Profile number to the port. When initially displaying
the panel, the first defined Device Profile will be assigned to all ports. Pressing PF9-Default
will not change the value of this field.
Host Assignment At Power On A-J
These fields display the Host Assignments for the individual ports. You may modify the host
assignment for any port if you wish.