Visara LINCS Configuration - Manual (Page 33)

15
Chapter 1. Getting Started
707023-003
LU to PU Mapping Menu
Host LU to LAN PU mapping redirects Host PUs (LINCS 3270 Host Circuits) to PUs on a
LAN, which is also termed PU Concentration. LUs on the host are mapped to LUs on
downstream PUs, but all the LUs appear to be on the same LINCS PU to the host. The LU to
PU Mapping submenu is where you can add or modify the way LUs are mapped to LINCS
PUs. You can enter the LU to PU Mapping configuration process at any point you wish. Or
you can run through the complete process, by starting at General Options.
LU to PU Mapping Menu LINCS C8.2 Central Control
Item Description
1 Line Options
2 Link Profiles
3 3270 Host Profiles
4 3270 Host Circuits
5 3270 Host Classes
6 LU to PU Mapping Profiles
Select Item: Depress Enter
PF: 1-Menu 3-Panel_List 10-Done
IPX SNA Server Menu
The IPX SNA Server menu allows you to define access to 3270 hosts for IPX clients on the
LAN. You can enter the IPX SNA Server configuration process at any point you wish, which
is good for updates. Or you can run through the complete process, by starting at General
Options, and PF8-Forwarding through all the panels necessary to add the IPX SNA Server to
your existing configuration.
IPX SNA Server Menu LINCS C8.2 Central Control
Item Description
1 Line Options
2 IPX Options
3 Link Profiles
4 3270 Host Profiles
5 3270 Host Circuits
6 3270 Host Classes
Select Item: Depress Enter
PF: 1-Menu 3-Panel_List 10-Done