Visara LINCS Configuration - Manual (Page 208)

190
LINCS Configuration
707023-003
Inactivity Timeout
Allows you to specify the amount of inactive time allowed before the display is logically
disconnected from LINCS.
Enter the number of minutes; allowable values are 0000 through 1440. 0000 indicates no timeout.
LINCS warns the user by displaying a message on the status line one minute prior to disconnect.
Synchronous Presentation
For devices that are slow to update, LINCS will discard earlier screens, and draw the latest
one. An example of this is if a user hits “next screen” fast 5 times. The user really wants to see
the 5th screen, so LINCS won’t draw the intervening screens.
DISABLE will activate this software, to get the user to the latest of a series of screens faster.
ENABLE of this option defeats LINCS’ optimization of screen updates for a flow of fast
screens. That is needed for instances where every screen buffer must be drawn fully, such as
ASCII file transfer.
E/W Presentation Option
ENABLE of the Erase/Write Presentation Option will cause LINCS to ignore “clear screen”
commands from the host. When LINCS draws the next screen buffer, it always only updates
what has changed. With this option enabled, it ensures that is always the case. This option is
especially useful in making ASCII terminals act more like 3270 terminals.
DISABLE passes the “clear screen” commands unaltered.
Device Profile - Printer
Device Profile 01/Printer LINCS C8.2 Central Control
0 1
Printer Mode: Shared 1234567890123456
Print Buffering: Disable Printer Class Assignment:1000000000000000
ASCII PRINTER OPTIONS
Printer Emulation: Generic Printer Buffer Size: Mod 2
Form Feed Support: Disable LU3 Null Suppression: Disable
Forms Width: 080 Printer Character Set: NRC
Forms Length: 066 Local Print Form Feed: Before & After
Count 2nd Transparent Order: Disable
SCS Transparent Data Xlate: Disable
LU1 Protocol Enveloping: Disable
Enveloping Delay After CR: 000
Enveloping Delay After FF: 000
PF: 1-Menu 3-Def_Dflt 4-Add 5-Delete 7-Back 8-Forw 9-Default 10-Done
The Device Profile/Printer panel is displayed as the second panel of the device profile if the
Device Type on the first panel is chosen to be a printer.