Visara LINCS Configuration - Manual (Page 60)

42
LINCS Configuration
707023-003
There are three different options for Role field of LMI Options, which result in slightly different
LMI Options sections in the panel:
• User - shown above in the example panel
• Network (Switch)
• Disabled
The Line Options panel for Frame Relay is followed by a panel for LLC Options on this
Frame Relay line.
LMI Options for Network (Switch) Role
Line Options/HSC1.0 LINCS C8.2 Central Control
.
.
.
LMI OPTIONS
Role: Network (Switch)
Type: ANSI T1.617 Annex D
Polling Verification Timer - T392 (sec): 15
Error Threshold - N392: 03
Monitored Events Count - N393: 04
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
This shows the LMI Options portion of the Frame Relay Line Options panel when the LMI
Role has been toggled to Network (Switch). The only field different from the User Role is
that Link Verification Timer becomes Polling Verification Timer.
LMI Options for Disabled LMI Role
Line Options/HSC1.0 LINCS C8.2 Central Control
.
.
.
LMI OPTIONS
Role: Disabled
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
This shows the LMI Options portion of the Frame Relay Line Options panel when the LMI
Role has been toggled to Disable.
Default Committed Information Rate (CIR)
The CIR field is a decimal data entry field that defines the default normal information transfer
rate in bits per second. The entered CIR will be used for all PVCs on this line which are not
specified on a PVC definition panel. Valid entries range from 0 to 8,000,000. The default is
64,000. The CIR should be less than or equal to the line speed (transmit clock rate).