Visara LINCS Configuration - Manual (Page 227)

209
Chapter 14. RPQs
707023-003
RPQs LINCS C8.2 Central Control
DESCRIPTION STATUS
Suppress the automatic CLEAR key when connecting to a Shared Session Disable
During TN3270E negotiation, always tell client what LU was assigned Disable
PF: 1-Menu 7-Back 8-Forw 10-Done
The RPQs panel is manually entered from the configuration menu. It will not automatically
appear as you are paging through the configuration panels. Description of the individual
RPQs follows.
Local SNA DE/UC Online Status Delay - This invokes a 200 msec delay in returning DE/
UC to the host when attempting to initialize the PU. Without the delay, the 1174 may on
occasion provide interrupts to the host faster than the host can properly process them. This
RPQ is required only in VSE environments.
NetView RPQ 1 - Machine Type - This RPQ causes the 1174 to identify itself as a 3174 in
the machine type field of NMVT data streams used by NetView, Net Master, and other network
management products. This RPQ may be needed with certain levels of the network management
products to allow the Alerts generated by the 1174 to be interpreted the same as they would be
if they were generated by a 3174.
NetView RPQ 2 - Product Class - This RPQ causes the 1174 to identify itself as a non-IBM
device in the PSID of the NMVT data streams used by NetView, Net Master, and other network
management products to allow the Alerts generated by the 1174 to be distinguished from
similar Alerts sent by the 3174.
Multiple LFS LUs per Host - The LFS feature has been enhanced to allow for multiple LFS
LUs on a single host. When enabled for a host, LUs 01-08 are assigned for LFS use and may
not be used for CUT devices. The amount of memory assigned for LFS will be on a per
session basis. Use of this RPQ precludes use of LFS for on 7 of the possible 16 host circuits.
Local format group entries require 44 bytes instead of 40 bytes.
TAB/BACKTAB keys stop at COLONs and TABs - This RPQ is rather self-explanatory.
When enabled, and the user presses the TAB or BACKTAB key, the cursor will tab forward or
reverse to the space immediately following a field attribute or a COLON. When disabled, the
TAB or BACKTAB key will cause the cursor to stop at the next screen position following a
field attribute only.
Use key scan code values in WSC mode - WSC mode assigns special functions to certain
keys. With some languages, these keys may be found in positions on the keyboard other than
where you would find them on a U.S. English keyboard. Our manuals and overlays refer to
these functions according to keyboard position. This RPQ when enabled, will base the special
functions on key scan codes (keyboard position), instead of key identity.
Upper Case Translate of all data keys - When this RPQ is enabled, all letters typed will be
entered into the video buffer of the terminals as upper case letters.