ACTi ECD-1000 - Manual (Page 119)

www.acti.com
ECD-1000 User Manual
119
Adding Users
1. On the Setup screen, click User > User . By default, the “admin” user is preset and cannot
be deleted.
2. Click Add User.
3. Enter the following information:
Item Description
Name Enter a user name. The name can be up to 63 alphanumeric
characters; symbols are not allowed.
Password Enter the password that will be used by the user to log into the
Decoder.
Confirm Password Re-type the password here. The two passwords must match.
User Group Select the group to where the user belongs. This group defines
the access rights granted for the user.
4. Click OK. The new user is added to the user table.