ACTi ECD-1000 - Manual (Page 12)

www.acti.com
ECD-1000 User Manual
12
Device Overview
Item Description
1 Power LED Lights RED when the power is on.
2 System Ready LED /
Factory Default LED

Lights GREEN after the boot up process is complete to
indicate the Decoder is ready.

When doing a factory reset, this LED lights GREEN briefly
to indicate factory default setting restoration has started.
The LED turns off and lights up again when the restoration
completes and the Decoder is ready for use.
3 Reset Button /
NTSC and PAL Switch

Use to restore the Decoder to its factory default setting.

Use to switch between NTSC and PAL functions.
4 DC 12V Power
Connector
Connects the bundled power adaptor and terminal block to the
Decoder. See Preparing the Power Adaptor on page 16.
5 USB Port Connects a USB device, such as a mouse, keyboard or hub, to
the Decoder.
6 Ethernet Port Connects to the network using an Ethernet cable.