ACTi ECD-1000 - Manual (Page 131)

www.acti.com
ECD-1000 User Manual
131
Chapter 4:
Installation and Maintenance
This chapter describes the different ways to install the Decoder:

Surface Mount

VESA Mount

Pole Mount
4.1 How to Surface Mount?
The Decoder can be mounted on a straight wall or on a table or pedestal. For wall installation, it
is recommended to install the Decoder with the HDMI and Composite connectors facing down.
1. Mark the 4 screw holes on the surface.
2. If necessary, drill the holes and insert the plastic plugs.
3. Attach the 4 supplied screws to secure the device.