Ftp upgrade failure, System software image file missing errors – H3C Technologies H3C SR6600 User Manual
Page 103
93
To solve this problem, type the correct file name.
3.
The configuration of the network port is incorrect.
Can't connect to the remote host
To solve this problem, configure the network port correctly, and make sure the network port is up
and you can successfully ping the TFTP server from the network port.
NOTE:
The barcode stuck on the router chassis contains production and servicing information. Before you return
a faulty router for serving, provide the barcode information of the router to your local sales agent.
FTP upgrade failure
Start the router, and upgrade the software through FTP. The following problems might occur:
•
The CF card has no enough space.
227 Entering Passive Mode (192,168,1,10,10,204)
150 "xxx" file ready to send (xxx bytes) in ASCII mode
FTP: Error Writing Local File(Screen).
To solve this problem, delete some files in the CF card or use a new CF card so that enough space
is available for the application program.
•
The file to be downloaded is not found.
227 Entering Passive Mode (192,168,1,10,10,203)
550 Error: File xxx does not exist
FTP: Error Writing Local File(Screen).
To solve this problem, type the correct file name.
•
The configuration of the network port is incorrect.
FTP: Unrecognized host or wrong IP address!
To solve this problem, configure the network port correctly, and make sure the network port is up
and you can successfully ping the FTP server from the network port.
NOTE:
The barcode stuck on the router chassis contains production and servicing information. Before you return
a faulty router for serving, provide the barcode information of the router to your local sales agent.
System software image file missing errors
When none of the main, backup, and secure system software image files exists, the system displays the
following information at startup:
BootWare Validating...
Application program does not exist.
Please input BootWare password:
If you select 1 on the main BootWare menu, the system displays the following information:
Starting to get the main application file--cfa0:/main.bin!
The main application file does not exist--cfa0:/main.bin!
Starting to get the backup application file--cfa0:/backup.bin!