H3C Technologies H3C SR6600 - Manual (Page 134)

124
Figure 116 SAP-24GBP front panel
(1) SFP ports 0 to 23 (2) SAP module status LED (RUN)
(3) LEDs for SFP ports 0 to 23 (4) Ejector levers
(5) Captive screw
Table 56 SAP-24GBP specifications
Item Specification
Flash 4 MB
Memory type and size
• Default—Two 1-GB DDR2 SDRAMs
• Maximum—Two 2-GB DDR2 SDRAMs
NVRAM 128 KB
Max power consumption 150 W
Connector type SFP
Number of interfaces 24
Interface standards 802.3, 802.3u, and 802.3ab
Supported frame format
Ethernet_II
Ethernet_SNAP
Transmissi
on power
Type
Short haul
(850 nm) Medium haul
(1310 nm) Long haul
(1310 nm) Long haul
(1550 nm)
Ultra-long
haul (1550
nm)
Min –9.5 dBm –9 dBm –2 dBm –4 dBm –4 dBm
Max 0 dBm –3 dBm 5 dBm 1 dBm 2 dBm
Receiving sensitivity –17 dBm –20 dBm –23 dBm –21 dBm –22 dBm
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Fiber type
62.5/125
μm
multi-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
9/125 μm
single-mode
fiber
Max transmission
distance
0.55 km
(0.3418
miles)
10 km (6.21
miles) 40 km (24.86
miles) 40 km (24.86
miles) 70 km (43.50
miles)
Interface speed
1000 Mbps (recommended)
Full duplex
The SAP-24GBP supports the following types of transceiver modules: