H3C Technologies H3C SR6600 - Manual (Page 33)

23
If the power module LED is green, the power module operates correctly. If the LED is red, the power
module has failed.
Connecting a power cord
Connecting an AC power cord
1. Make sure the power is OFF.
2. Make sure the router is well grounded.
3. Connect one end of the AC power cord to the AC receptacle on the router, and the other end to
the AC power source.
4. Fix the power cord to the power module handle by using a cable tie.
Figure 22 Connecting an AC power cord to the router
Connecting a DC power cord
Connecting the power cord for the PSR650-D
WARNING!
Identify the label on the DC power cord when connecting a DC power cord to avoid connection mistakes.
Figure 23 DC power cord
To connect the DC power cord: