H3C Technologies H3C SR6600 - Manual (Page 120)

110
Item Specification
• Memory type and size
• MCP-X1
{
Default—One 2-GB DDR3 SDRAM
{
Maximum—Two 2-GB DDR3 SDRAMs
• MCP-X2
{
Default—Two 2-GB DDR3 SDRAMs
{
Maximum—Two 2-GB DDR3 SDRAMs
NVRAM 128 KB
Combo interfaces
4
Copper ports (automatic MDI/MDI-X)
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
Fiber ports
1000 Mbps, full-duplex
1000 Mbps, full-duplex
10 Gbps Ethernet ports
• MCP-X1—None
• MCP-X2—2
Console port
1
9600 bps (default) to 115200 bps
AUX port
1
9600 bps (default) to 115200 bps
Management Ethernet port 1 (10Base-T/100Base-TX/1000Base-T)
CF card
• 1 GB by default for the built-in CF card
• 256 MB, 512 MB, or 1 GB for an optional external CF card (CF cards less than
256 MB are not supported)
USB port 1 (USB 0: Type A connector, operating in the host mode)
Reset button 1
Dimensions (H × W × D) 45 × 399 × 412 mm (1.77 × 15.71 × 16.22 in)
Power consumption 53 W
Hot swapping Supported
Components
CF card
A compact flash (CF) card stores logs, system software image files, and configuration files.
The router is equipped with a built-in CF card, which is identified with cfa0. In addition, the router
provides an external CF card slot to expand the storage space.
The CF cards supported by the router are available in the following sizes:
• 256 MB
• 512 MB
• 1 GB