H3C Technologies H3C SR6600 - Manual (Page 133)

123
Figure 115 SAP-48GBE front panel
(1) LEDs for GE ports 0 to 47 (2) SAP module status LED (RUN)
(3) GE ports 0 to 47 (4) Ejector levers
(5) Captive screw
Table 55 SAP-48GBE specifications
Item Specification
Flash 4 MB
Memory type and size
• Default—Two 1-GB DDR2 SDRAMs
• Maximum—Two 2-GB DDR2 SDRAMs
NVRAM 128 KB
Max power consumption 200 W
Connector type RJ-45
Number of interfaces 48
Interface standards 802.3, 802.3u, and 802.3ab
Interface type Automatic MDI/MDIX
Cable type Straight-through/crossover Ethernet cable
Transmission distance 100 m (328.08 ft)
Supported frame format
Ethernet_II
Ethernet_SNAP
Interface speed and
duplex mode
10 Mbps Full/half duplex, auto-negotiation
100 Mbps Full/half duplex, auto-negotiation
1000 Mbps Full duplex, auto-negotiation
SAP-24GBP
The SAP-24GBP has 24 high-performance fiber SFP ports that can be both routed and switched. One
two-color LED is available for each port to indicate their activity and link status. The module also has a
RUN LED to indicate the module operating status.