H3C Technologies H3C SR6600 - Manual (Page 118)

108
NOTE:
•
Flash memory stores the BootWare image.
• SDRAM stores running configuration and buffers data during data forwarding.
• Non-volatile random access memory (NVRAM) stores system exception logs.
• The CF card stores system software image and configuration files.
RSE-X1
Figure 107 RSE-X1 MPU
(1) Reset button (RESET) (2) CF card button
(3) CF card (4) CF card LED
(5) Host-mode USB port 0 (0) (6) Device-mode USB port 1 (1)
(7) USB 1 LED (8) LINK/ACT LED for the Ethernet management port
(9) Management Ethernet port (MANAGEMENT) (10) Console port (CONSOLE)
(11) AUX port (AUX) (12) Active/Standby LED (ACT)
(13) Power alarm LED (PALM) (14) RUN LED
(15) System alarm LED (ALM)
Table 31 RSE-X1 specifications
Item Specification
Flash 4 MB
Memory type and size
• Default—Two 1-GB DDR2 SDRAMs
• Maximum—Two 2-GB DDR2 SDRAMs
NVRAM 128 KB
Console port
1
9600 bps (default) to 115200 bps
AUX port
1
9600 bps (default) to 115200 bps
Management Ethernet port 1 (10Base-T/100Base-TX/1000Base-T)
CF card
• 256 MB by default for the built-in CF card
• 256 MB, 512 MB, or 1 GB for an optional external CF card (CF cards less than
256 MB are not supported)
USB ports
2 (USB 0: Type A connector, operating in the host mode; USB 1: Type B
connector, operating in the device mode)
Reset button 1