H3C Technologies H3C SR6600 - Manual (Page 117)

107
RPE-X1
Figure 106 RPE-X1 MPU
(1) Reset button (RESET) (2) RUN LED
(3) Active/Standby LED (ACT) (4) Alarm LED (ALM)
(5) LINK/ACT LED for the Ethernet management port (6) Management Ethernet port (MANAGEMENT)
(7) Console port (CONSOLE) (8) AUX port (AUX)
(9) Host-mode USB port 0 (0) (10) Device-mode USB port 1 (1)
(11) USB 1 LED (12) CF card LED
(13) CF card (14) CF card button
Table 30 RPE-X1 specifications
Item Specification
Flash 4 MB
Memory type and size
• Default—One 1-GB DDR2 SDRAM
• Maximum—Two 1-GB DDR2 SDRAMs
NVRAM 128 KB
Console port
1
9600 bps (default) to 115200 bps
AUX port
1
9600 bps (default) to 115200 bps
Management Ethernet
port
1 (10Base-T/100Base-TX/1000Base-T)
CF card
• 256 MB by default for the built-in CF card
• 256 MB, 512 MB, or 1 GB for an optional external CF card (CF cards less than
256 MB are not supported)
USB ports
2 (USB 0: Type A connector, operating in the host mode; USB 1: Type B connector,
operating in the device mode)
Dimensions (H × W × D) 40 × 199 × 282 mm (1.57 × 7.83 × 11.10 in)
Power consumption 37 W
Reset button 1
Hot swapping Supported