H3C Technologies H3C SR6600 - Manual (Page 148)

138
LED Status Description
(yellow/green)
SFP0 through
SFP3
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of
1000 Mbps.
Steady yellow A 100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of
100 Mbps.
CAUTION:
Do not remove the CF card when the CF LED is flashing. Otherwise, the file system on the CF card will be
damaged.
Figure 121 MCP-X2 LEDs
Table 68 MCP-X2 LED description
LED Status Description
(yellow/green)
GE0 through
GE3
Off The corresponding interface is not connected.
Steady green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of
1000 Mbps.
Steady yellow A 10/100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of
10/100 Mbps.
(yellow/green)
CF card LED
Off
No CF card is present or the CF card is not
recognizable.
Steady green A CF card is in position and has been detected.
Flashing green
The system is accessing the CF card. In this state, do
not remove the CF card.
Steady yellow A CF card not provided by H3C.