H3C Technologies H3C SR6600 - Manual (Page 151)

141
Figure 125 FIP-210 LEDs
Figure 126 FIP-240 LEDs
Table 70 FIP-110/210/240 LED description
LED Status Description
(yellow/green)
10/100/100
0 Mbps copper
Ethernet port
Off No link is present.
Solid green A 1000 Mbps link is present.
Flashing green
Data is being received or transmitted at a rate of 1000
Mbps.
Solid yellow A 10/100 Mbps link is present.
Flashing yellow
Data is being received or transmitted at a rate of
10/100 Mbps.
(green)
Run LED
Off No power input is available or the FIP has failed.
Slow flashing (1
Hz)
The FIP is operating correctly.
Fast flashing (8
Hz)
Application software is being loaded (in this case,
never power off the device or hot-swap the FIP;
otherwise, the FIP might be damaged).
(yellow/green)
1000 Mbps
fiber Ethernet
port LED
Off No link is present.
Solid green A link is present.
Flashing green Data is being sent or received at a rate of 1000 Mbps.
Solid yellow The transceiver module failed to be detected.