H3C Technologies H3C SR6600 - Manual (Page 36)

26
Installing FRUs
Field replaceable units (FRUs) are not provided with the router. Purchase them as needed.
Installing an air filter
1. Position the upper slide rail horizontally near the top of the left side of the chassis, as shown
in
Figure 28 . Align the screw holes on the slide rail with those on the chassis.
2. Fasten the fastening screws one by one with a Phillips screwdriver.
3. Position the lower slide rail horizontally near the bottom of the left side of the chassis, as shown
in
Figure 29 . Align the screw holes on the slide rail with those on the chassis.
4. Fasten the fastening screws one by one with a Phillips screwdriver.
Figure 28 Installing the air filter slide rails
5. Gently push the air filter along the slide rails until it is seated in position.