HEIDENHAIN TNC 407 (280 580) User Manual User Manual
Page 355
12-11
12
Tables and Overviews
TNC 425/TNC 415 B/TNC 407
TNC displays, TNC editor
Graphic simulation without programmed tool axis: Tool radius
MP7315
0 to 99 999.9999 [mm]
Graphic simulation without programmed tool axis: Penetration depth
MP7316
0 to 99 999.9999 [mm]
Graphic simulation without programmed tool axis: M function for start
MP7317.0
0 to 88 (0: function inactive)
Graphic simulation without programmed tool axis: M function for end
MP7317.1
0 to 88 (0: function inactive)
Size of program memory for blockwise transfer
MP7228.0
Minimum memory to be used:
1 to 1024 [kilobytes]
MP7228.1
Maximum memory to be used:
1 to 1024 [kilobytes]
Effect of cycle 11 SCALING FACTOR
MP7410
Scaling factor effective in 3 axes:
0
Scaling factor effective only in working plane:
1
Tool compensation data in probe cycle TOUCH PROBE 0
MP7411
Current tool data are overwritten by calibrated data from 3D touch probe:
0
Current tool data are retained:
1