HEIDENHAIN TNC 407 (280 580) User Manual User Manual
Page 357
12-13
12
Tables and Overviews
TNC 425/TNC 415 B/TNC 407
Electronic handwheels
Handwheel type
MP7640
Machine without handwheel:
0
HR 330 with additional keys– the keys for traverse direction and rapid traverse on the
handwheel are evaluated by the NC:
1
HR 130 without additional keys:
2
HR 330 with additional keys– the keys for traverse direction and rapid traverse on the
handwheel are evaluated by the PLC:
3
HR 332 with 12 additional keys:
4
Multi-axis handwheel with additional keys: 5
Setting the interpolation factor
MP7641
Interpolation factor is entered from the keyboard:
0
Interpolation factor is set by the PLC:
1
Functions set by the machine tool builder for the handwheel
MP 7645.0
0 to 255
MP 7645.1
0 to 255
MP 7645.2
0 to 255
MP 7645.3
0 to 255
MP 7645.4
0 to 255
MP 7645.5
0 to 255
MP 7645.6
0 to 255
MP 7645.7
0 to 255