Yaskawa F7 Modbus - Manual (Page 79)

User Notes 5-10
Table 5.1 – User Parameter Settings
Parm Text Default User Notes
L4-06 Fref at Floss 80.00 %
L5-01 Num of Restarts 0
L5-02 Restart Sel 0
L6-01 Torq Det 1 Sel 0
L6-02 Torq Det 1 Lvl 150 %
L6-03 Torq Det 1 Time 0.1 Sec
L6-04 Torq Det 2 Sel 0
L6-05 Torq Det 2 Lvl 150 %
L6-06 Torq Det 2 Time 0.1 Sec
L7-01 Torq Limit Fwd 200 %
L7-02 Torq Limit Rev 200 %
L7-03 Torq Lmt Fwd Rgn 200 %
L7-04 Torq Lmt Rev Rgn 200 %
L7-06 Torq Limit Time 200 ms
L7-07 Torque Limit Sel 0
L8-01 DB Resistor Prot 0
L8-02 OH Pre-Alarm Lvl 95 Deg
L8-03 OH Pre-Alarm Sel 3
L8-05 Ph Loss In Sel 0
L8-07 Ph Loss Out Sel 0
L8-09 Ground Fault Sel 1
L8-10 Fan On/Off Sel 0
L8-11 Fan Delay Time 60 Sec
L8-12 Ambient Temp 45 Deg
L8-15 OL2 Sel @ L-Spd 1
L8-18 Soft CLA Sel 1
n1-01 Hunt Prev Select 1
n1-02 Hunt Prev Gain 1
n2-01 AFR Gain 1
n2-02 AFR Time 50 ms
n2-03 AFR Time 2 750 ms
n3-01 HSB Decel Width 5 %
n3-02 HSB Current Ref 150 %
n3-03 HSB DwelTim@Stp 1.0 Sec
n3-04 HSB OL Time 40 Sec
o1-01 User Monitor Sel 6
o1-02 Power-On Monitor 1
o1-03 Display Scaling 0
o1-04 Display Units 0
o1-05 LCD Contrast 3