Yaskawa Sigma-5 Large Capacity Users Manual: Design and Maintenance-Command Option Interface - Manual (Page 344)

10.1 List of Parameters
10-15
10
Ap
pend
ix
Pn460
2 Notch Filter Adjustment Switch 0000 to 0101 − 0101 Immediately Tuning
5.2.1
5.3.1
5.5.1
Pn501 2 Reserved (Do not change.) − − 10 − − −
Pn502 2 Rotation Detection Level 1 to 10000 1 min -1 20 Immediately Setup 4.6.3
Pn503 2 Speed Coincidence Signal Output Width 0 to 100 1 min -1 10 Immediately Setup 4.6.5
Pn506 2 Brake Reference - Servo OFF Delay Time 0 to 50 10 ms 0 Immediately Setup 4.2.7
Pn507 2 Brake Reference Output Speed Level 0 to 10000 1 min -1 100 Immediately Setup 4.2.7
Pn508 2
Waiting Time for Brake
Signal When Motor Running
10 to 100 10 ms 50 Immediately Setup 4.2.7
Pn509 2 Instantaneous Power Cut Hold time 20 to 50000 1 ms 20 Immediately Setup 4.2.9
(cont’d)
Parameter
No.
Size Name
Setting
Range
Units
Factory
Setting
When
Enabled
Classi-
fication
Reference
Section
Notch Filter Adjustment Selection 1
0 Does not adjust 1st step notch filter automatically using utility function.
1 Adjust 1st step notch filter automatically using utility function.
Reserved (Do not change.)
Notch Filter Adjustment Selection 2
0 Does not adjust 2nd step notch filter automatically using utility function.
1 Adjust 2nd step notch filter automatically using utility function.
Reserved (Do not change.)
4th 3rd 2nd 1st
digit digit digit digit
n.