Mail box (mbx fax), Mbx management, Creating an mbx – TA Triumph-Adler CLP 4524 User Manual
Page 110: P. 5-34, Mbx fax), Management
5-34
Operation
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm
M
AIL
BOX
(MBX FAX)
There are 32 mailboxes (MBX), enabling you to transmit documents in complete confidence using an
access code (named code MBX), to all subscribers equipped with a fax compatible to yours.
MBX 00 is public. It is handled directly by the terminal to record the messages of the fax TAD as soon
as this is put into service.
MBX’s 01 to 31 are private. Each is password-protected. They can be used to receive documents
confidentially.
The use and access to MBX 01 - 31 are conditioned by the initialisation, defined by a MBX code (if
needed) and a mnenonic (its S.I.D.).
Later you may:
• modify the features of an MBX
• print the contents of an MBX, only possible if the MBX contains one or more documents (with a
star next to the MBX). When the contents of an MBX have been printed it becomes empty
• delete an MBX, only if the MBX is initialised and empty
• print the list of your fax machine’s MBX’s
You may receive and send through an MBX in complete confidentiality.
The deposit a document into your MBX, the access code is not needed. All documents deposited in a
MBX are added to the ones already present.
In polling, the MBX are only accessible with an MBX code.
You may perform MBX deposits or polls by:
• depositing a document in a fax MBX
• transmit to deposit a document in a remote fax MBX
• perform document poll from a remote fax.
MBX
MANAGEMENT
Creating an MBX
71 OK - MAILBOXES / CREATE MBX
Select a free MBX out of the 31 MBX or directly enter the number of a free MBX and confirm
with OK.
Select option
MAILBOX CODE
and press OK.
Value 0000 is always displayed.
Enter the code of your choice, if needed, and press OK.
Select option
MAILBOX NAME
and press OK.
Enter this MBX ’s S.I.D. (20 characters max.) and press OK.
The MBX is initialised. If you wish to initialise another, press C and repeat the same procedure.
To exit the
MBX
, press
key
.