TA Triumph-Adler CLP 4524 - Manual (Page 94)

5-18
Operation
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm
 You can also directly adjust the desired contrast using the key, press this key several times
until the required adjustment is obtained without using 846.
847 OK - ADVANCED FCT / COPY / LUMINOSITY
 The LUMINOSITY parameter is used to make your original document lighter or darker. Adjust
the brightness required using keys and , then validate the choice with the OK key.
848 OK - ADVANCED FCT / COPY / BINDING
 The BINDING parameter is used to choose the long or short side according to the type of binding
of your document. Make your choice using keys
and , then validate the choice with the
OK key.
Caution -
All settings made using this menu become default settings of the machine.
85 OK - ADVANCED FCT/ SCAN. & PRINT
 Use keys or of the browser to scroll the setting described below that you want to modify.
 Validate your setting by pressing the OK key.
851 OK - ADVANCED FCT/ SCAN. & PRINT/ PAPER
 Select NORMAL or THICK paper using and keys.
 Validate your setting by pressing the OK key.
Note: 1) When THICK paper type is selected, the print speed is slowed down.
2) Use the manual feeder for paper with a weight greater than 90 g/m
2
.
852 OK - ADVANCED FCT/ SCAN. & PRINT/ PAPER TRAY
 Select the paper tray that you want to use; AUTOMATIC, LOWER or UPPER using and
keys.
 Validate by pressing the OK key.
853 OK - ADVANCED FCT/ SCAN. & PRINT/ PAPER SAVE
This function prints all your documents duplex.
Note: This function requires the prior installation on the rear of your machine of the duplex unit and the additional
paper tray.