TA Triumph-Adler CLP 4524 - Manual (Page 40)

3-2
Setting your machine
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Configuration Gb.fm
B
EFORE TRANSMISSION
Date/Time
You can, at any moment, modify the current date and time of your fax. You can also activate the
automatic management of summer and winter time. The changeover is performed the last Sunday of
March for the changeover to summer time and the last Sunday of October for the changeover to winter
time.
To change the date and time:
21 OK - SETUP / DATE/TIME / MODIFY
 Enter the numbers of the required time and date one after another,
(for example November 8 2005 at 9h33, press 0811050933) and press OK to confirm.
To activate automatic changeover between summer and winter time:
212 OK - SETUP / DATE/TIME / AUTO ADJUST
 Select the WITH option and validate your choice with the OK key.
Your fax number/your name
You must obligatorily allocate an identifier to your terminal. This identifier can be the name of the
person or company using the terminal. It will be shown on each page of the documents transmitted by
the terminal. If no identifier has been recorded, your terminal will display an error code when sending
a document by fax.
Your fax will print out your fax number on each document it transmits if you save this number and if
the machine is set to
SENDING HEADER (please see the paragraph Technical parameters, on
page 3-9).
To save your fax number and your name:
22 OK - SETUP / NUMBER/NAME
 Enter your fax number (20 digits max.) and press OK to confirm.
 Enter your name (20 characters max.) then press OK to confirm.
Type of network
You may connect your fax to either a PSTN or private network such as private automatic branch
exchange (PABX). You must select the network which is the most convenient.