TA Triumph-Adler CLP 4524 - Manual (Page 48)

3-10
Setting your machine
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Configuration Gb.fm
10 - RX HEADER 1 - WITH
2 - WITHOUT If this parameter is on, all documents received by your fax
will include the subscriber’s header with his name, number (if
available) fax print date and the page number.
11 - RX SPEED 1 - 33600
2 - 14400
3 - 9600
4 - 4800
5 - 2400 Transmission speed for incoming documents.
For a quality telephone line (compatible, no echo),
communications occur at maximum speed.
However, it may be necessary to restrict the transmission
speed for some calls.
12 - RINGS 2 TO 5 Number of rings to automatically start your machine.
20 - E.C.M.
(ERROR
CORRECTION) 1 - WITH
2 - WITHOUT This parameter helps correct the calls made on
disturbed telephone lines. It is used when the lines are weak
or too noisy. Transmission times may be longer.
24 - FAX B&W
FALLBACK 1 - WITH
2 - WITHOUT When this parameter is active ("with"), it autorises the fax to
fall back to B&W transmission when the fax of the adressee
is not colour-compatible.
When this parameter is not active ("without"), the
transmission will be cancelled and a report is printed to
inform you of the error.
70 - NET VALID 06:01 TO 21:59 This parameter lets you modify the period when the fax
connects automatically to the Internet.
This menu is available only if the connection type is set to
PERIODIC ( 941 ).
71 - NET ACTIVE 7 DAYS / WEEK
MON TO FRI This parameter lets you select the days of the week when the
fax connects automatically to the Internet.
This menu is available only if the connection type is set to
PERIODIC ( 941 ).
72 - MODEM SPEED 1 - 56000
2 - 33600
3 - 14400
4 - 12000
5 - 9600
6 - 7200
7 - 4800
8 - 2400
9 - 1200
0 - 600 Choice of maximum Internet transmission speed.
For a quality telephone line (compatible, no echo),
communications occur at the maximum speed.
However, it may be necessary to restrict the transmission
speed for some Internet calls (bad line or bad ISP settings).
73 - IMPROVE
REP @ 1 - WITH
2 - WITHOUT This parameter lets you automatically register the Internet
address of your subscribers fax during a call (if available).
Parameter Setting Signification