TA Triumph-Adler CLP 4524 - Manual (Page 56)

3-18
Setting your machine
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Configuration Gb.fm
• servers, allows you to identify the name of the IP address of Internet SMTP providers (send) and
POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server address is made
up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when the SMTP server
used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
 Select the Internet provider from the list NO ACCESS , PROVIDER_1 , PROVIDER_2 ,
PROVIDER_3 , PROVIDER_4 , PROVIDER_5 , PROVIDER_6 or LOCAL NETWORK , and
press OK.
Choosing NO ACCESS disables access to Internet functions.
92 OK - INTERNET / INIT. PROVIDER
921 OK - INTERNET / INIT. PROVIDER / CONNECTION
 Enter the CALL NUMB. , press OK.
 Enter connection IDENTIFIER
1
, press OK.
 Enter connection PASSWORD , press OK.
922 OK - INTERNET / INIT. PROVIDER / MESS. SERV
 Enter Email IDENTIFIER , press OK.
 Enter Email PASSWORD , press OK.
 Enter E-MAIL ADR , press OK.
Access to servers parameters
923 OK - INTERNET / INIT. PROVIDER / SERVERS
 Enter SMTP , press OK.
 Enter POP3 , press OK.
 Enter DNS 1 , press OK.
Access to the authentification SMTP parameters
924 OK - INTERNET / INIT. PROVIDER / SMTP AUTHENT.
In the ACTIVATION menu, select WITH to activate SMTP authentification then validate with OK
key.
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.