TA Triumph-Adler CLP 4524 - Manual (Page 144)

6-32
Maintenance
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\MaintenanceGb.fm
Storage Error Codes
Hard Disk Errors
Memory Card Errors
Code Meaning
01 Hard disk format error. If this error recurs even if the power has
been turned off and then on, reformat the hard disk.
02 The disk system is not installed. Recheck the requirements for
using the system and the devices.
04 There is no available hard disk space. Delete unnecessary files,
etc., in order to free up space.
05 The specified file does not exist in the hard disk.
06 There is no memory available to the hard disk system. Increase
the available memory.
10 Formatting is not possible because host data is being spooled on
the hard disk. Wait until the hard disk is ready, and then format.
85 VMB: Alias error. The alias setting was lost, or the virtual tray
corresponding to the alias does not exist. Set the alias again.
97 The number of permanent code jobs that can be stored reached
the limit value, and no more can be saved. Either delete some
unnecessary jobs, etc., or increase the limit.
98 An unreadable page was found in a job (The job is damaged.).
99 A print job for the specified ID does not exist in the hard disk.
Code Meaning
01 The printer does not support the memory card inserted. The
memory card must meet the requirements described in the
Options, section of the Advanced Operation Guide.
02 The memory card is not installed.