TA Triumph-Adler CLP 4524 - Manual (Page 14)

1-6
Installation
Date en cours : 11 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Installation Gb.fm
I
NSTALLATION OF THE TERMINAL
Installation of the base and the equipped interface
 Set the base down vertically, and insert the
columns of the equipped mechanical interface
into their respective openings.
Screw in and tighten the 8 mounting screws.
Take hold of the upper part of the interface and
set the assembly upright.
 Optional equipment:
Place the additional paper tray on the base,
positioning it on its locating pins.
You can install up to three additional paper
trays.
 Optional equipment:
Place the duplex unit on the additional paper
tray, positioning it on its locating pins.