Compatible usb keys, Informations on the use of the photo memory device, Printing a photo from a memory device – TA Triumph-Adler CLP 4524 User Manual

Page 97: Supported image files, Rinting, Photo, From, Device

Advertising
background image

Operation

5-21

Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm

Operation

Setting yo

ur

machine

Getting started

Director

y

M

aintenance

Safety

Contents

Installation

Compatible USB keys

The memory keys must be FAT16 or FAT32 formatted for the terminal to be able to read them.
NTFS formatted memory keys are not compatible with the terminal.

Informations on the use of the photo memory device

• Take due care when inserting the memory device in the appropriate slot and make sure it is

inserted with the correct orientation.

• Do not use more that one device at the same time!
• If your multifunction terminal cannot read the memory device that you are using, check that

it is compatible and that you have inserted it correctly.

• Once in place, do not remove the device before the multifunction terminal has finished all

the print commands.

• If the "MEDIA ERROR - WRITE ERROR" message is displayed during a recording or era-

sing operation on a memory support, this means that the latter is write-protected. Recording
or erasing is possible only after this protection has been de-activated.

• A write-protected file (read-only) cannot be deleted from a memory support.

Note:

The Analyse Media function allows you at all times to consult the contents of the inserted memory card,
and this even if you have quit the media menu and the terminal is again in initial mode. Press

/OK

and 08.

P

RINTING

A

PHOTO

FROM

A

MEMORY

DEVICE

Your multifunction terminal is equipped with all the tools and connections needed to make it into
a fully independent photo printer. You can print your digital photos from a photo memory card
or from a USB memory key.

Supported image files

You can use photo files that meet the following requirements:

Device format

Compatible DCF (Design Rule for Camera File System (Version
1.0))

File format

JPG (JPEG) BASELINE Format

Image size

Maximum 6 Mb

Supported resolution

between 76800 and 12 million pixels

N° of files recognised

Up to 999

Advertising
This manual is related to the following products: