TA Triumph-Adler CLP 4524 - Manual (Page 150)

6-38
Maintenance
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\MaintenanceGb.fm
P
ACKING AND TRANSPORTING THE UNIT
If you wish to transport the unit, always use the original packaging. If you do not pack the unit correctly,
you could void the warranty.
Scanner unit
 Set the mains switch of the machine to OFF.
 Disconnect the mains lead from the wall socket, then disconnect all the cables connected to the
machine.
 Remove all the receptacles from the machine. The printer, the duplex unit (depending on the
model or option), the additional paper trays are all to be packed separately in their respective
packing boxes.
 Package the receptacles in their original plastic packaging and cardboard boxes, put the original
plastic packaging on the machine and place it in its original box with its components
(receptacles, documentation, etc.).
Put all the documentation (manual and printed documents) in the box and close the box with adhesive
tape.
Printer unit
 Make sure your terminal is fully switched off (switch set to 0). Disconnect the terminal from the
network and from the mains socket.
 Package the printer in the following manner:
- Remove all the toner cartridges and the waste toner box from the printer.
Put the toner cartridges in the plastic bag supplied for the purpose, to avoid
any toner being spilled. Make sure the waste toner box is fully closed.
- Put the developers protective packing piece (1) in place.