TA Triumph-Adler CLP 4524 - Manual (Page 4)

READY
ATTENTION
INTERFACE SIZE TYPE
DATA
GO
CANCEL MENU
ENTER
?
1 2 3 4 5 7 8 9 6
10 11 12 13 14 15
1. The console's LCD screen.
2. ATTENTION Indicator:
On: A problem or error (e.g. a paper jam) has occurred.
Blinking: The printer requires maintenance or is
warming up.
3. READY Indicator:
On: The printer is ready, or printing the received
data.
Blinking: An error has occurred.
Off: Indicates that the printer is in standby mode.
Data will be received but will not be printed (see
GO key).
4. DATA Indicator:
On: The data has been processed or stored on the
memory card.
Blinking: Data transfer in progress.
5. Key: Used to navigate in the sub-menus and to
adjust certain settings.
6. Key: Used to navigate the menus and to increase
numerical values.
7. Key: Used to navigate in the sub-menus, to
adjust certain settings and to display help messages
when certain errors occur.
8. MENU Key: Used to access or exit the printer's menu.
9. CANCEL Key: Used to cancel a print job.
10. GO Key: Used to switch the printer between
Ready and Standby mode.
11. ENTER Key: Confirms the numerical values and
other selections.
12. Key: Used to navigate the menus and to devease
numerical values.
13. Indicator: Shows the type of paper being
used in the tray.
14. Indicator: Shows the paper size being used in
the tray.
15. Indicator: Shows the interface being used
(PAR, USB, RES or --).
TYPE
SIZE
INTERFACE
P
RINTER CONTROL PANEL