TA Triumph-Adler CLP 4524 - Manual (Page 127)

Maintenance
6-15
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\MaintenanceGb.fm
Op
er
ati
on
Setting yo
ur
machine
Getting started
Director
y
Mainte
nanc
e
Safety
Contents
Installation
C
LEANING
Cleaning the scanner’s reading devices
When one or more vertical lines appear on transmitted copies or faxes, follow these steps:
Cleaning the printer
Clean the outside of the printer by means of a soft cloth dampened with neutral household
detergent.
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Note: If the message "Clean Printer Press GO" appears after replacing the toner cartridge. Carry out the printer
cleaning procedures (corona, grille, etc.) described in the paragraph General Information, on page 6-2
then press the GO button. The message will disappear and the printer will be ready to print.
 Open the scanner cover by
pushing it backwards until held
vertically in position
 Clean the two transparent
scanning windows with a soft,
lint-free cloth, dampened with
alcohol.
 Close the scanner cover.
 Make a copy to check that the
symptoms have been cleared.