General considerations for clearing jams, Possible paper jam locations – TA Triumph-Adler CLP 4524 User Manual

Page 146

Advertising
background image

6-34

Maintenance

Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\MaintenanceGb.fm

Possible Paper Jam Locations

The figure below explains the printer’s paper paths including the options. The locations where paper
jams might occur are also shown here, with each location explained in the table below. Paper jams can
occur in more than one component on the paper paths.

General considerations for clearing jams

Bear in mind the following considerations when attempting jam removal:

• If paper jams occur frequently, try using a different type of paper, replace the paper with paper

from another ream, flip the paper stack over, or rotate the paper stack 180 degrees. Selection of
paper is fully discussed in the Handling Paper section in the Advanced Operation Guide. The
printer may have problems if paper jams recur after the paper was replaced.

Face-up Tray
PT-300

Duplex Unit
DU-300/DU-301

Paper Feeder
PF-60

Paper jam message

Paper jam

location

Description

Reference

page

Paper jam
Printer

A

Paper is jammed at paper
cassette 1 or inside the
printer.

p. 6-35

Paper jam
Cassette 2 (to 4)

B

Paper is jammed at the
optional paper feeder’s
cassette.

p. 6-37

Paper jam
MP Tray

Paper jam
EF

C

Paper is jammed at the
MP tray or optional
envelope feeder (if
installed).

p. 6-37

Paper jam
Duplexer

D

Paper is jammed inside
the rear cover of the
optional duplexer or at
the duplexer drawer.

p. 6-37

Advertising
This manual is related to the following products: