TA Triumph-Adler CLP 4524 - Manual (Page 62)

3-24
Setting your machine
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Configuration Gb.fm
T
HE
SMS
SERVICE
Thanks to the button you can send an SMS to subscribers all over the world. An SMS (Short
Message Service) is a service which permits short written messages to be sent to mobile phones or other
SMS-compatible devices.
The number of characters you can send per message is dependent upon the service provider and the
country you are sending your SMS from (e.g. Germany 160 characters, Italy 640 characters).
The SMS service is dependent upon the country and the service provider.
Caution
- There is a special scale of charges for the SMS service.
SMS P
ARAMETERS
This menu is used to set several options:
• automatic SMS print on reception,
• beep activated during SMS reception,
• send your details activated,
• the address of your terminal.
The address is only modified if several terminals are installed on your line. It is used to differentiate
between two machines during SMS reception.
When you want a contact to send SMSs to the terminal you choose, you must send him your line
number and the destination terminal address.
If your contact does not add the address of the terminal, the SMS will be received in the terminal with
address 0.
45 OK - SMS SERVICE / PARAMETERS
 Automatic print of SMS received
- SMS SERVICE / PARAMETERS / AUTO PRINT
 Select the option WITH or WITHOUT automatic print, then validate with OK key.
 Beep activated on SMS reception
452 OK - SMS SERVICE / PARAMETERS / SMS BEEP
 Select the option WITH or WITHOUT beep on reception, then validate with OK key.
 Presentation of SMS sender
453 OK - SMS SERVICE / PARAMETERS / SENDER NAME
 Select the option WITH or WITHOUT presentation of the sender, then validate with OK key.