Putting a memory device in place, Crystal image function, Printing a photo from a memory device – TA Triumph-Adler CLP 4524 User Manual
Page 98
5-22
Operation
Date en cours : 10 janvier 2008
C:\Documents and Settings\g097447\Bureau\LU 253068043 HFC colour USB - UTAX EN\Utilisation Gb.fm
Putting a memory device in place
If your digital camera uses a memory device to record the image files, you can use it in your
multifunction terminal to print image files or other documents. It is also possible to digitise a photo or
a document with the scanner and to record it in the memory device (please see the paragraph Recording
a document in a memory device, on page 5-25).
Crystal Image function
Your terminal is equipped with the Crystal Image optimisation function that you can use to obtain an
optimal print quality.
Crystal Image has 2 components that can be used depending on your requirements:
• Image optimisation
• "red-eye" correction
Crystal Image automatically performs all the necessary adjustments and corrections to obtain the best
possible print quality in terms of image sharpness, and colour and contrast management. Also, exposure
faults will be corrected (for example, under-exposed photos swill be brightened or parts of a photo with
high contrast will be compensated).
The "red-eye" correction function corrects the "red-eye" effect on pictures taken with flash.
These functions are activated by pressing the
key.
The following table shows the number of times the
key must be pressed to activate or de-activate
the various components of the Crystal Image function.
.
Printing a photo from a memory device
When you insert a memory card in your multifunction terminal, the card is immediately analysed. The
number of files on the card is displayed (by increments of 5), and then the media menu opens.
Select
PRINT PHOTO
by means of the
or
keys, then validate with the OK key or type
1
on the numerical keyboard. You can directly access the photo print function by pressing the
key
01 OK - MEDIA / PRINT PHOTO
Number of
key
presses
Crystal Image function state
Image optimisation
"Red-eye" correction
0 (default state)
De-activated
De-activated
1
Activated
De-activated
2
Activated
Activated
3 (return to the default state)
De-activated
De-activated